2 The HP CS300 Vertica appliance
This section provides information about your servers and will help you to locate components in
your HP CS300 Vertica appliance.
The appliance arrives at your location in a default configuration with pre-loaded software as shown
in
Table 2: “Appliance configuration”
.
Table 2 Appliance configuration
Configuration
HP Vertica server
•
HP ProLiant DL380p Gen8 server
•
2U Rack form factor
•
Two Intel Xeon E5–2690v2 (CPU)
•
Ethernet 10Gb 2P 561FLR-T FIO adapter
•
Two 300GB 6G SAS 10K 2.5in SC ENT HDD
•
Twenty-three 600GB 6G SAS 10K 2.5in SC ENT HDD
•
Two 750W CS Plat PL hot plug power supply kit
•
128 GB (eight 16GB 2Rx4 PC3–14900R-13 kit)
HP Insight Cluster Management Utility – 3 year 24x7 Flex license
2 Management
servers
•
HP ProLiant DL360p Gen8 server
•
1U Rack form factor
•
One Intel Xeon E5–2660 v2 (CPU)
•
64 GB (four 16GB 2Rx4 PC3–14900R-13 kit) memory
•
Four 600 GB 6G SAS 10K 2.5in SC ENT HDD
•
Ethernet 10 Gb 2P 51FLR-T FIO adapter
•
Two 460W CS Plat PL hot plug power supply kit
HP Insight Control
HP Vertica Analytics Platform
HP Insight Control Flex license
RHEL Server 2 Skt 1 Guest 24x7 3 year license
HP Insight Cluster Management Utility – 3 year 24x7 Flex license
HP Insight Remote Support Advanced
Operating System — Red Hat Enterprise Linux 6.4
Operating System — Windows server 2012
HP 5900AF-48XGT 4QSFP+ switch
Networking
•
Forty-eight RJ-45 1/10GbE ports
•
Four QSFP+ 40–GbE ports
•
One RJ-45 serial console port
•
One RJ-45 out-of-band management port
•
One USB 2.0
3 year — 4 hour 24x7 Proactive Care
Support
TIP:
Serial numbers are listed on the Linux management server in the
/opt/hp/CS300/
CS300SN.log
file and on each physical device.
5
