13
2.5
Powering the Camcorder On / Off
2.5.1
Auto Power On/Off
Once the vehicle engine is started, the camcorder automatically turns on.
If the
Automatic Record
function is enabled, the recording will
automatically start right after the camcorder turns on.
Please refer to
Set Automatic Record
(2.6.2)
2.5.2
Manual Power On/Off and Reset
2.5.2.1
Manual Power On
Push the
power switch
and make sure that the power switch locks on the
memory card slot.
On
2.5.2.2
Power Off
Push the
power switch
and make sure that the memory slot is released
and the camcorder starts power off sequence. Do not power on the
camcorder when it is in the power-off sequence, or the recorded file may
become corrupt.
Off
2.5.2.3
Reset the camcorder
In case the camcorder fails to function normally due to unknown causes,
push the
power switch
and verify the memory card is in the removable
state; wait for 7 seconds and push the power switch again to restart the
camcorder.
Содержание Compaq Presario,Presario F558
Страница 1: ...f558 Car Camcorder User Manual ...
