HP Compaq Presario,Presario F558, Руководство по техническому обслуживанию и ремонту

Страница: 100 / 122

To copy the screen and paste it into a word-processing document:
a
. Display the screen.
b
. Copy the screen:
To copy only the active window, press alt+fn+prt sc .
To copy the entire screen, press fn+prt sc .
c
. Open a word-processing document, and then select Edit> Paste .
Using system restore points
When you back up your system, you are creating a system restore point. A system restore point allows
you to save and name a snapshot of your hard drive at a specific point in time. You can then recover
back to that point if you want to reverse subsequent changes made to your system.
NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since
the last restore point.
You also can create additional restore points to provide increased protection for your system files and
settings.
When to create restore points
●
Before you add or extensively modify software or hardware.
●
Periodically, whenever the system is performing optimally.
NOTE: If you revert to a restore point and then change your mind, you can reverse the restoration.
Create a system restore point
1
.
Select
Start > Control Panel> System and Maintenance > System
.
2
. In the left pane, click System protection .
3
. Click the System Protection tab.
4
. Under Automatic restore points, select the disk for which you want to create a restore point.
5
. Click Create .
The System Protection window opens.
6
. Follow the on-screen instructions.
Restore to a previous date and time
1
.
Select
Start > Control Panel> System and Maintenance > System
.
2
. In the left pane, click System protection .
3
. Click the System Protection tab.
4
.
Click the
System Restore
button, and then click
Next
.
92 Chapter
8
Backup and Recovery