HP Compaq Presario,Presario 650, Руководство по установке

Страница: 22 / 130

When the self-test is complete:
The Status LED should be green.
The Pwr, Fan, and Temp LEDs should be off.
In each row of LEDs for an interface slot where a module (the
routing engine or an interface card) is installed, the Card LED (the
first LED in each row) should be green and the Self-test LED (the
second LED in each row) should be off.
In each row of LEDs for an interface slot where a module is not
installed, all LEDs should be off.
N o t e
If any LED appears differently, refer to chapter 3, “Troubleshooting.”
4. After the Status LED turns green, look for the following line of text
on the console’s display:
Waiting for speed sense.
or a line of garbled characters.
N o t e
If a line of characters does not appear on the console, refer to chapter 3,
“Troubleshooting.”
Status
Self-test
1 2 3 4
Net
Fail
Net
Fail
Net
Fail
Rx Tx Rx Tx Rx Tx Rx Tx Card
1 2 3 4
Net
Fail
Net
Fail
Net
Fail
Rx Tx Rx Tx Rx Tx Rx Tx
Self-test Card
1 2 3 4
Net
Fail
Net
Fail
Net
Fail
Rx Tx Rx Tx Rx Tx Rx Tx Self-test Card
Self-test
1 2 3 4
Net
Fail
Net
Fail
Net
Fail
Rx Rx Rx Rx
Ins Ins Ins Ins Card
Self-test R o u t i n g E n g i n e U t i l i z a t i o n
20% 10% 30% 40% 50% 60% 70% 80% 90% 00 1 %
Card
Status
Card
Self-test
Fan
Pwr
Figure 1-11. Router and Module Status LED Locations
Temp
Installation
Plug in and verify router hardware.
1-18