Display assembly
Description
Spare part number
33.78 cm
(13.3-in) WXGA Brightview display assembly for use in Compaq Presario CQ32–
branded computers
608017-001
33.78 cm
(13.3-in) WXGA Brightview display assembly for use in HP G32–branded computers
628920-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 41
).
5.
Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 46
).
6.
Remove the following components:
a.
Optical drive (see
Optical drive on page 54
)
b.
WLAN module (see
WLAN module on page 46
)
c.
Top cover (see
Top cover on page 55
)
d.
USB board (
USB board on page 61
).
Remove the display assembly:
1.
Turn the computer display-side up, with the front toward you.
2.
Open the display as far as possible.
3.
Disconnect the display panel cable
(1)
from the system board.
4.
Remove the two Phillips PM2.5×8.0 screws
(2)
that secure the display assembly to the computer.
CAUTION:
Support the display assembly when removing the display screws in the following
steps. Failure to support the display assembly can result in damage to the assembly and other
components.
5.
Remove the wireless antenna cables
(3)
from the hole and clips built into the base enclosure.
Component replacement procedures
73
Содержание Compaq Presario CQ32
