17–2
Administrators Guide
TCP/IP Telnet Configuration
The following table discusses the functions of a Telnet
connection.
Table 17–1:
TCP/IP Telnet Configuration
Function
Description
Host Port Number
Enter the Telnet host port number. The
default is
23.
Local Port Number
Implemented to allow connection to
Misys hosts. This allows the host to
communicate back to the emulator on a
different port than the emulator uses to
talk to the host. The default is
0.
Telnet Name
Enter the Telnet virtual terminal name.
The default depends on emulation
(VT400, 7-bit, default is
vt420)
.
Suppress
Use the functions of this group box as
needed (controls in this area become
active depending on the type of
emulation selected):
■
Echo
(default)
■
3270 Regime
■
TN3270E
■
TN5250E
Force Negotiation
Use the
Binary
and
EOR
drop-down
scroll lists to configure negotiation
parameters. The default for
Binary
is
No
and the default for
EOR
is
No.
Break Settings
Use the
TM with Break
and
CR with
Break
check boxes to configure break
settings.
250091-001.book Page 2 Friday, July 13, 2001 9:26 AM
Содержание Compaq Evo T20
