manualshive.com logo in svg

HP Compaq dx7500 Series, Руководство по устранению неисправностей

Поделиться
Скачать
HP Compaq dx7500 Series Скачать руководство пользователя страница 23

Nonsystem disk/NTLDR missing message.

Cause

Solution

The system is trying to start from the hard drive but the hard
drive may have been damaged.

1.

Insert a bootable diskette into the diskette drive and
restart the computer.

2.

Check the hard drive format using fdisk: If NTFS
formatting, use a third party reader to evaluate the drive.
If FAT32 formatting, the hard drive cannot be accessed.

System files missing or not properly installed.

1.

Insert a bootable diskette into the diskette drive and
restart the computer.

2.

Check the hard drive format using Fdisk: If NFTFS
formatting, use a third party reader to evaluate the drive.
If FAT32 formatting, the hard drive cannot be accessed.

3.

Install system files for the appropriate operating system.

Hard drive boot priority needs to be changed in Computer
Setup.

Run the Computer Setup utility and change the boot priority in

Boot

 > 

Boot Device Priority

.

Bootable hard drive is not attached as first in a multi-hard drive
configuration.

If attempting to boot from a hard drive, ensure it is attached to
the system board connector labeled SATA 0.

Bootable hard drive's controller is not listed first in the Boot
Order.

Run the Computer Setup utility and change the hard drive boot
order in 

Boot

 > 

Boot Device Priority

 > 

Hard Drive Group

Boot Priority

.

Computer will not boot from hard drive.

Cause

Solution

The device is attached to a SATA port that has been disabled
in Computer Setup.

Run the Computer Setup utility and ensure 

SATA1

Controller

 is 

Enabled

 in the 

Advanced

 menu.

Boot order is not correct.

Run the Computer Setup utility and change boot sequence in

Boot

 > 

Boot Device Priority

.

Hard drive is damaged.

See the Worldwide Limited Warranty for terms and conditions.

Computer seems to be locked up.

Cause

Solution

Program in use has stopped responding to commands.

Attempt the normal Windows “Shut Down” procedure. If this
fails, press the power button for four or more seconds to turn
off the power. To restart the computer, press the power button
again.

Table 2-4

  Solving Hard Drive Problems (continued)

ENWW

Solving Hard Drive Problems

17

Содержание Compaq dx7500 Series






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды