HP Compaq dx6050, Справочник по аппаратуре, Страница: 27 / 68

Hardware Reference Guide www.hp.com 2–15
Hardware Upgrades
Installing a DDR-SDRAM DIMM
✎
If only one memory module is used in the system, it must be installed
in the same socket that held the preinstalled memory module.
✎
If you are adding a second DIMM or replacing a single smaller
DIMM with two larger DIMMs, both DIMMs should be of the same
capacity in order to achieve a higher performing, dual-channel mode.
1. Begin by installing a module into the socket nearest the
preinstalled module, and install the modules following the
numerical order of the sockets. Open both latches of the memory
module socket
1
, and insert the memory module into the
socket
2
.
Installing a DIMM
✎
A memory module can be installed in only one way. Match the notch
on the module with the tab on the memory socket.
2. Push the module down into the socket, ensuring that the module
is fully inserted and properly seated. Make sure the latches are in
the closed position
3
.