HP Compaq dx6050 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 68

HP Compaq dx6050 Скачать руководство пользователя страница 25

Hardware Reference Guide

www.hp.com

2–13

Hardware Upgrades

Removing or Installing DDR-SDRAM DIMMs

Ä

CAUTION:

The memory module sockets have gold metal contacts. When

upgrading the memory, it is important to use memory modules with gold
metal contacts to prevent corrosion and/or oxidation resulting from having
incompatible metals in contact with each other.

Ä

CAUTION:

Static electricity can damage the electronic components of

the computer or optional cards. Before beginning these procedures,
ensure that you are discharged of static electricity by briefly touching a
grounded metal object. Refer to

Appendix E, “Electrostatic Discharge”

for

more information.

Ä

CAUTION:

When handling a memory module, be careful not to touch

any of the contacts. Doing so may damage the module.

Preparing the Computer

1. If you have locked the Smart Cover Lock, use Computer Setup to

unlock the lock.

2. Exit all software applications, turn off the computer properly

through the operating system, then turn off any external devices.

3. Disconnect the power cord from the power outlet and disconnect

any external devices.

4. Remove the computer access panel and locate the memory

module sockets.

Å

WARNING:

To reduce risk of personal injury from hot surfaces, allow

the internal system components to cool before touching.

«
...
23
24
25
26
27
...
»

Содержание Compaq dx6050





































































Отзывы:

Нет отзывов