manualshive.com logo in svg

HP Compaq dc7900 Business PC, Руководство по обслуживанию и справочник

HP Compaq dc7900 Business PC - высокопроизводительный компьютер для офисного использования. Подробные технические характеристики и инструкции доступны для бесплатного скачивания на manualshive.com. Получите все необходимые руководства по эксплуатации прямо сейчас!

Поделиться
Скачать
background image

System Security

 (some

models: these options
are hardware
dependent)

Data Execution Prevention (some models) (enable/disable) - Helps prevent operating system
security breaches.

Virtualization Technology (some models) (enable/disable) - Controls the virtualization features of the
processor. Changing this setting requires turning the computer off and then back on.

Virtualization Technology Directed I/O (some models) (enable/disable) - Controls virtualization DMA
remapping features of the chipset. Changing this setting requires turning the computer off and then
back on.

Trusted Execution Technology (some models) (enable/disable) - Controls the underlying processor
and chipset features needed to support a virtual appliance. Changing this setting requires turning
the computer off and then back on. To enable this feature you must enable the following features:

●

Embedded Security Device Support

●

Virtualization Technology

●

Virtualization Technology Directed I/O

Embedded Security Device Support (some models) (enable/disable) - Permits activation and
deactivation of the Embedded Security Device. Changing this setting requires turning the computer
off and then back on.

NOTE:

To configure the Embedded Security Device, a Setup password must be set.

●

Reset to Factory Settings (some models) (Do not reset/Reset) - Resetting to factory defaults
will erase all security keys. Changing this setting requires turning the computer off and then
back on.

CAUTION:

The embedded security device is a critical component of many security schemes.

Erasing the security keys will prevent access to data protected by the Embedded Security
Device. Choosing Reset to Factory Settings may result in significant data loss.

●

Power-on authentication support (some models) (enable/disable) - Controls the power-on
password authentication scheme that utilizes the Embedded Security Device. Changing this
setting requires turning the computer off and then back on.

●

Reset authentication credentials (some models) (Do not reset/Reset) - Selecting Reset disables
the power-on authentication support and clears the authentication information from the
Embedded Security Device. Changing this setting requires turning the computer off and then
back on

OS management of Embedded Security Device (some models) (enable/disable) - This option allows
the user to limit operating system control of the Embedded Security Device. Changing this setting
requires turning the computer off and then back on. This option allows the user to limit OS control
of the Embedded Security Device.

●

Reset of Embedded Security Device through OS (some models) (enable/disable) - This option
allows the user to limit the operating system ability to request a Reset to Factory Settings of
the Embedded Security Device. Changing this setting requires turning the computer off and
then back on.

NOTE:

To enable this option, a Setup password must be set.

Smart Card BIOS Password Support (some models) (enable/disable) - Allows the user to enable/
disable the Smart Card to be used in place of the Setup and Power-On Passwords. This setting
requires additional initialization within ProtectTools before this option will take effect.

PAVP (Some models) (disabled/min/max) - PAVP enables the Protected Audio Video Path in the
Chipset. This may allow viewing of some protected high definition content that would otherwise be
prohibited from playback. Selecting Max will assign 96 Megabytes of system memory exclusively to
PAVP.

Setup Security Level

Provides a method to allow end-users limited access to change specified setup options, without
having to know the Setup Password.

Table 4-1

  Security Features Overview (continued)

42

Chapter 4   Desktop Management

Содержание Compaq dc7900 Business PC













































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Compaq dc7900 Business PC

ACE COMPUTERS VISION Series Technical Reference Manual preview
VISION Series
Бренд: ACE COMPUTERS Страницы: 37
NEC POWERMATE P - SERVICE 1996 Service And Reference Manual preview
POWERMATE P - SERVICE 1996
Бренд: NEC Страницы: 178
Alienware 13 R3 Setup And Specifications preview
13 R3
Бренд: Alienware Страницы: 20
Neousys Technology Nuvo-6000 Series User Manual preview
Nuvo-6000 Series
Бренд: Neousys Technology Страницы: 100
Sony BZMA-E555 Installation Manual preview
BZMA-E555
Бренд: Sony Страницы: 11
Sony MSX2 HB-F9P Hit Bit Operating Instructions Manual preview
MSX2 HB-F9P Hit Bit
Бренд: Sony Страницы: 23
Sony MSX 2 HB-F9P Operating Instructions Manual preview
MSX 2 HB-F9P
Бренд: Sony Страницы: 23
Sony HB-F9P Operating Instructions Manual preview
HB-F9P
Бренд: Sony Страницы: 23
Sony eVilla NTE-D101 User Manual preview
eVilla NTE-D101
Бренд: Sony Страницы: 41
Sony Cyber-shot DSC-T50 Service Manual preview
Cyber-shot DSC-T50
Бренд: Sony Страницы: 43
Sony BKNE-1010 Maintenance Manual preview
BKNE-1010
Бренд: Sony Страницы: 72
Sony Cyber-shot DSC-T50 Handbook preview
Cyber-shot DSC-T50
Бренд: Sony Страницы: 120
Sony ICD VGN-UX200 User Manual preview
ICD VGN-UX200
Бренд: Sony Страницы: 194
Knight Eko Workstation Assembly Instructions Manual preview
Eko Workstation
Бренд: Knight Страницы: 6
Trident Trident B926 Service Manual preview
Trident B926
Бренд: Trident Страницы: 20
Shuttle XPC SN27P2 User Manual preview
XPC SN27P2
Бренд: Shuttle Страницы: 34
ITCI Brasov CoBra Hardware Description preview
CoBra
Бренд: ITCI Brasov Страницы: 63
Shuttle NC03U User Manual preview
NC03U
Бренд: Shuttle Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды