HP Compaq dc7800 MT страница 25 Скачать руководство пользователя | Manualshive

Страница: 25 / 102

background image

Technical Reference Guide

www.hp.com

2-9

System Overview

2.3.5 Mass Storage

All models support at least two mass storage devices, with one being externally accessible for
removable media. These systems provide the following interfaces for internal storage devices:

USDT: one SATA interface, one SATA-to-PATA bridge/interface for a Slimline optical drive

SFF: three SATA interfaces

CMT: four SATA interfaces

These systems may be preconfigured or upgraded with a SATA hard drive and one removable
media drive such as a CD-ROM drive.

2.3.6 Serial and Parallel Interfaces

The SFF and CMT form factors include a serial port and a parallel port, both of which are
accessible at the rear of the chassis. The SFF and CMT form factors may be upgraded with a
second serial port option.

The serial interface is RS-232-C/16550-compatible and supports standard baud rates up to
115,200 as well as two high-speed baud rates of 230K and 460K. The parallel interface is
Enhanced Parallel Port (EPP1.9) and Enhanced Capability Port (ECP) compatible, and supports
bi-directional data transfers.

2.3.7 Universal Serial Bus Interface

All models provide ten Universal Serial Bus (USB) ports. Two ports are accessible at the front of
the unit, six ports are accessible on the rear panel, and two ports are accessible on the system
board. The SFF and CMT form factors support a media card reader module that connects to the
two internal ports. These systems support USB 1.1 and 2.0 functionality on all ports.

2.3.8 Network Interface Controller

All models feature an Intel gigabit Network Interface Controller (NIC) integrated on the system
board. The controller provides automatic selection of 10BASE-T, 100BASE-TX, or
1000BASE-T operation with a local area network and includes power-down, wake-up,
Alert-On-LAN (AOL), Alert Standard Format (ASF), and Active Management Technology
(AMT) features. An RJ-45 connector with status LEDs is provided on the rear panel.

«
...
23
24
25
26
27
...
»

Содержание Compaq dc7800 MT







































































































Отзывы:

Нет отзывов

Похожие инструкции для Compaq dc7800 MT

Бренд: Acer Страницы: 17

Бренд: Acer Страницы: 19

Бренд: IBM Страницы: 132

Бренд: IBM Страницы: 140

IntelliStation Z Pro 6223

Бренд: IBM Страницы: 134

IntelliStation Z Pro 6221

Бренд: IBM Страницы: 168

IntelliStation E Pro

Бренд: IBM Страницы: 80

IntelliStation A Pro 6224

Бренд: IBM Страницы: 132

Бренд: IBM Страницы: 206

IntelliStation M Pro

Бренд: IBM Страницы: 190

Бренд: IBM Страницы: 450

Бренд: IBM Страницы: 112

Бренд: IBM Страницы: 124

Бренд: IBM Страницы: 152

Бренд: IBM Страницы: 206

Бренд: IBM Страницы: 64

SST-GD02B Grandia Sereis GD02

Бренд: SilverStone Страницы: 14

Бренд: ABB Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды