HP Compaq Businessdc7600, Руководство по обслуживанию и справочник

Страница: 217 / 268

Service Reference Guide, dc7600 390742-001 C–3
POST Error Messages
207-ECC Corrected
Single Bit Errors in
DIMM slot(s) Memory module is
experiencing correctable
errors. If additional memory was recently
added, remove it to see if the problem
remains.
If memory module was not recently
installed and frequency of error message
increases, consider replacing the
module.
Check product documentation for
memory support information.
213-Incompatible
memory Module in
memory Socket(s)
X,X, X
A memory module in
memory socket identified
in the error message is
missing critical SPD
information, or is
incompatible with the
chipset. Verify proper memory module type.
Try another memory socket.
Replace memory with a module
conforming to the SPD standard.
214-DIMM
Configuration Warning Populated DIMM
configuration is not
optimized. Rearrange the DIMMS so that each
channel has the same amount of
memory.
216-Memory Size
Exceeds Maximum
Supported Recently added memory
module(s) exceeds the
supported memory
amount for the system. If additional memory was recently
added, remove it to see if the problem
remains.
Check product documentation for
memory support information.
219-ECC Memory
Module Detected. ECC
Modules not supported
on this platform Recently added memory
module(s) support ECC
memory error correction. If additional memory was recently
added, remove it to see if the problem
remains.
Check product documentation for
memory support information.
301-Keyboard Error Keyboard failure. Reconnect keyboard with computer
turned off.
Check connector for bent or missing
pins.
Ensure that none of the keys are
depressed.
Replace keyboard.
303-Keyboard
Controller Error I/O board keyboard
controller. Reconnect keyboard with computer
turned off.
Replace the system board.
POST Error Messages (Continued)
Screen Message Probable Cause Recommended Action