PCI CI Adapter
PCI CI Adapter
PCI CI Adapter
PCI CI Adapter
PCI CI adapter for OpenVMS systems only; requires two 5.0V PCI
slots and CI cable for each adapter
-
1
CIPCA-BA
CI cable xx=10, 20,45 meters
BNCIA-xx
HVD to LVD Converters
HVD to LVD Converters
HVD to LVD Converters
HVD to LVD Converters
HVD (High Voltage Differential) adapters and LVD (Low Voltage
Differential) devices are normally incompatible due to their
different signaling voltage levels. This incompatibility does not
allow direct communication between the different technologies.
The HVD to LVD converter allows connectivity between legacy HVD
Host Bust Adapters and today's LVD devices. The converter
provides:
Connectivity in direct attach or shared configurations of all
currently available LVD devices, including disks, tapes,
libraries, and shelves (4314 or 4354) when used with the
KZPBA-CB and 3X-KZPBA-CC HVD adapters. With the
retirement of StorageWorks 1 disks and HVD shelves
(BA36R), converters are desirable where upgrades to LVD
HBAs or upgrades to current operating system versions are
not possible.
Shared and direct attach configurations are interconnected much
the same as those previously configured with homogeneous HVD
solutions, except that the HVD output is now passed through the
converter before proceeding to the LVD device.
HVD to LVD one-port rackmount converter
(see QuickSpecs for configuration details)
3X-DWZCV-BA
HVD to LVD two-port rackmount converter
(see QuickSpecs for configuration details)
3X-DWZCV-CA
QuickSpecs
Compaq AlphaServer DS20E
Compaq AlphaServer DS20E
Compaq AlphaServer DS20E
Compaq AlphaServer DS20E
Compaq AlphaStation DS20E
Compaq AlphaStation DS20E
Compaq AlphaStation DS20E
Compaq AlphaStation DS20E
Options
DA - 10445 North America — Version 37 — October 24, 2003
Page 22
