HP Compaq 436 Скачать руководство пользователя страница 113 | Manualshive

Страница: 113 / 125

HP Compaq 436 Скачать руководство пользователя страница 113

Using Windows Backup and Restore

Guidelines:

●

Be sure that the computer is connected to AC power before you start the backup process.

●

Allow enough time to complete the backup process. Depending on file sizes, it may take over
an hour.

To create a backup:

1.

Select

Start > Control Panel > System and Security > Backup and Restore

.

2.

Follow the on-screen instructions to schedule and create a backup.

NOTE:

Windows includes the User Account Control feature to improve the security of the computer.

You may be prompted for your permission or password for tasks such as installing software, running
utilities, or changing Windows settings. Refer to Help and Support for more information.

Using Windows system restore points

A system restore point allows you to save and name a snapshot of your hard drive at a specific point in
time. You can then recover back to that point if you want to reverse subsequent changes.

NOTE:

Recovering to an earlier restore point does not affect data files saved or e-mails created since

the last restore point.

You also can create additional restore points to provide increased protection for your files and settings.

When to create restore points

●

Before you add or modify software or hardware

●

Periodically, whenever the computer is functioning optimally

NOTE:

If you revert to a restore point and then change your mind, you can reverse the restoration.

Backing up and recovering your information

105

«
...
111
112
113
114
115
...
»

Содержание Compaq 436






























































































































Отзывы:

Нет отзывов