Smart Component installation instructions for Linux environments
1.
Place the Smart Component in a temporary directory.
2.
Open a Linux command console.
3.
From the directory containing the downloaded file, enable execute access to this model by typing
chmod +x CPxxxxxx.scexe
, where CPxxxxxx.scexe represents the downloaded file.
4.
Execute the Smart Component by entering a command similar to the following:
./CPxxxxxx.scexe --target <ip_address> --user <manage_username> --passwd
<password>
If the user name or password contains an exclamation mark (!), enclose the string in single quotes
or enter a backslash (\) before the exclamation point. For example,
'!manage'
or
\!manage
.
5.
Follow onscreen instructions.
NOTE:
When prompted for logon information, enter credentials for an account with management
access rights.
Effective date
May 2011
8
Effective date
