Installation instructions for controller enclosure connect environments
Follow instructions in this section to update firmware when the MSA70 drive enclosure is connected
to a controller enclosure, which in turn is connected to a server or network.
•
“Smart Component installation instructions for Windows environments” (page 7)
•
“Smart Component installation instructions for Linux environments” (page 8)
Smart Component installation instructions for Windows environments
This is a self-extracting executable module. You can execute this module from the Windows graphical
user interface (GUI) or the command line console (CLI).
GUI option
1.
Place the downloaded Smart Component package in a temporary directory.
2.
Using Windows Explorer, navigate to the directory containing the download.
3.
Double click the executable file.
4.
Follow onscreen instructions.
NOTE:
When prompted for logon information, enter credentials for an account with management
access rights.
CLI option
The following syntax can be used to invoke at the command line:
cpxxxxxxx.exe /target <ip_address> /user <username> /passwd <password> /s
where:
•
ip_address
is the management IP address of the controller
•
username
is the username account with management rights
•
password
is the password for username
Instead of command line parameters you can use the following DOS environment variables:
•
oa_address
: set this variable for the IP address of controller
•
oa_username
: set this variable for the username of controller
•
oa_password
: set this variable for the password of controller
NOTE:
When prompted for logon information, enter credentials for an account with management
access rights.
Installation instructions
7
