HP C8372A - Digital Copier Printer 610 Color Inkjet, Руководство по печати

Страница: 24 / 48

use printing features 20
hp digital copier 610 printing and software guide
6
Click OK to close the Print Settings dialog box.
restore factory
defaults
Use the Factory Settings function to restore the original default settings
related to the Setup tab.
use the features tab
The Features tab allows you to adjust the following printer settings:
•
print on both sides of the page
• adjust the ink volume and dry time
• print multiple pages on a single sheet
• print a poster
• print a watermark
• print last page first
• enable the hp preview feature
• set the number of copies
Whenever you make a change in print settings in this tab, you can confirm
your change by viewing the image in the right corner or by enabling the HP
Preview feature. For more information, see enable the hp preview feature on
page 23.
print on both
sides of the page
You can print two-sided pages with your HP Digital Copier. When printing
two-sided pages, make sure to use paper that is thick enough so the images
do not show through to the other side. Some paper types, such as
transparencies and photo papers, have only one printing surface and
should not be used for two-sided printing.
Tip! To automatically print on both sides of the page, you
must have a two-sided printing accessory installed and
activated. The two-sided printing accessory is standard
equipment on some models. It can be purchased as an
accessory for all other models. For more information about
the accessory, see the HP Digital Copier 510/610 Reference
Guide .
1
If you are using Windows 2000 or XP, make sure that the Automatic
Two-Sided Printing Module option is activated. For more information,
see use the configuration tab on page 26.
Tip! If you have a two-sided printing accessory, the Automatic
option is selected by default. If you do not have a two-sided
printing accessory, the option is not available.
2
Select File , Print , select hp digital copier color series , then click
Properties .
3
Click the Features tab.