HP C8000 - Workstation - 0 MB RAM, Техническое справочное руководство

Страница: 58 / 114

3–30 Technical Reference Guide
Installing or Replacing Parts
3. Remove the chassis intrusion switch and temperature sensor:
a. Slide the switch out of the slot by pushing it in the direction shown 1 .
b. Pull the switch out of the opening 2 .
c. Pull up on the head of the plastic push rivet and remove it, then remove the sensor from
the system
5 .
Removing the chassis intrusion switch
4. Remove the panel from the system:
a. Use a Torx T-15 or slot screwdriver to remove the screws holding the front control
module in place
1 2 3
.
Unscrewing the front control module