HP Brio 8200, Онлайн-руководство

Страница: 23 / 86

23
2 About Your BIOS
The HP Setup Program
The HP Setup Program
The built-in Setup program is accessed by pressing the key during the POST . Online help for an item on the Setup
screen
can be obtained by highlighting the item (refer to page 24 for instructions on how to use the key functions). Help
is then displayed on the right of the screen. It is updated as you move the cursor to each field.
If you have any doubts about using the
Setup
program, contact your reseller for help.
The band along the top of the screen offers the following menus:
•
Main: for basic system configuration.
•
Advanced : for setting the Advanced Features available in the BIOS .
•
Security : for setting a password to restrict access to your computer. For information on how to set a password, refer
to “Restricting Access to Your Computer - Setting a Password” on page 26 .
•
Power : for selecting power-management modes to reduce the amount of energy used after specified periods of
inactivity.
•
Boot : for selecting your boot device order and priority. Refer to “Boot Device Priority” on page 25 .
•
Exit : for leaving the Setup program. Refer to “Saving Your Changes and Leaving Setup” on page 25.
The
Setup
program changes system behavior by modifying the power-on initialization parameters. Setting incorrect
values may cause system boot failure. Should this occur, press the key while you are in the Setup program to load
the Setup program’s default values. This should enable the computer to boot properly.
HP strongly recommends that you make a note of any changes you make while in the Setup program.