HP BL536A, Руководство пользователя и обслуживания

Страница: 46 / 165

Figure 36 Status: Inventory: Media details pane
In the media details pane,
•
Slot # — lists “Mailslot” or the index number of each slot in the magazine from lowest to
highest.
•
Attn — indicates an attention state for storage slots or provides information on the mailslot
state.
•
Status — Full or Empty.
•
In Drive — shows when the tape from this slot is in a drive.
•
Label — the bar code label data for the tape in the slot.
•
Media Loads — the number of times this tape has been loaded into a drive in its lifetime. This
field may be blank if the tape has not been loaded into a drive in this device or if the inventory
has changed.
•
Comment — any additional information about the tape in the slot (for example, Clean Tape
if the cartridge is a cleaning tape).
Configuration
Changing the system configuration
Use the Configuration: System page (page 47) to modify the system configuration.
System configuration changes are only applied after the Apply Selections or the Submit button is
selected. After making the selection, a warning page informs you of the impact of the proposed
change. In some cases a pop-up screen asks you to confirm the change. Many changes also require
the device to reboot. You may need to click
Refresh to see the changes.
46 Operating the Tape Autoloader