manualshive.com logo in svg

HP Bc1500 - BladeSystem - Blade PC, Руководство по установке и настройке, Страница: 103 / 149

Поделиться
Скачать
HP Bc1500 - BladeSystem - Blade PC Скачать руководство пользователя страница 103

Setup and Installation Guide

www.hp.com

D-9

Troubleshooting

Ä

CAUTION: 

Pressing the enclosure power button while the enclosure is 

running shuts down the enclosure and all Blade PCs.

Table D-4: Is the Enclosure Power LED on the Rear Panel Green? 

Answer

Possible Reasons

Possible Solutions

No, it is off.

The cable is not properly 
connected between the fan 
backplane and the power 
backplane.

Be sure that the connectors on the fan 
cable are properly seated and not 
damaged.

The interconnect tray is not fully 
inserted.

Remove and reseat the interconnect 
tray.

The Integrated Administrator 
module is not properly seated.

Contact HP or your authorized 
service provider for parts and 
service.

The fan backplane assembly has 
failed.

The connector on the power 
backplane is damaged.

The power backplane has failed.

No, it is amber.

The enclosure is in standby 
mode.

Push the enclosure power button on 
the fan cage at the rear of the 
enclosure.

Caution:

 Pressing the enclosure 

power button while the enclosure is 
running shuts down the enclosure and 
all Blade PCs.

Yes, it is green.

If the enclosure power LED is green, return to Table D-1.

Содержание Bc1500 - BladeSystem - Blade PC






















































































































































Отзывы:

Нет отзывов