18
Data Protector Express Installation Guide
TIP:
To cancel the upgrade process, click
Back
until you return to the first screen of the Installation
Manager. Then use the
Install
command to install Data Protector Express in a different directory.
6. The Select Packages window appears. Deselect or select the following options:
•
A shortcut to launch Data Protector Express from your desktop
•
The HP Data Protector Express service
•
Disable remote access:
Installs Data Protector Express without remote access support. Other
machines cannot perform remote administration and remote backups on this machine.
•
Remote administration only:
Installs Data Protector Express on the local machine, but does not
add the node to the database. This setup allows for only remote administration. Devices, disks,
etc. cannot be backed up.
7. When the Licenses screen appears (for some editions only), select the appropriate option.
•
Choose
No
if you intend to install the software for a 60-day evaluation period.
•
Choose
Yes
if you have already purchased a license. Enter the license key.
If you enter an upgrade key, Data Protector Express will prompt you to enter an old valid key.
8. A window displays a list of the items that will be installed. You can choose to have actions occur
after installation:
•
Open the Data Protector Express Tutorial 1
, which contains an overview of installation,
creating a backup job, and disaster recovery.
•
Start Data Protector Express Administrator
.
Click
F10
to install the listed features.
9. Click
Exit Installation
to quit the installation process. If you are using the Data Protector Express
CD_ROM, remove and store it as soon as the console prompt appears.
NOTE:
On some platforms, you must umount the CD drive to remove the Data Protector Express
CD-ROM.
Remove Data Protector Express
Select this option to remove Data Protector Express, all installed Data Protector Express options and the
catalog.
NOTE:
You do not have to remove Data Protector Express before upgrading to a newer version.
To remove Data Protector Express
1. Access the Installation Options screen, select
Remove Data Protector Express
, and press
Enter
.
The Data Protector Express Installation Directory screen appears.
NOTE:
At any point in this process, you can press
Esc
to back up to a previous screen.
2. The default location is as follows:
•
SYS:\HP (NetWare)
•
/usr/local/hp (Linux)
•
C:\Program Files\HP (Windows)
