HP Apollo a6000 Chassis Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 62

background image

Diagnostic tools 40

•

From within the iLO web interface

•

From within HPE Insight Diagnostics (on page

HPE Insight Diagnostics

The Insight Diagnostics is a proactive server management tool, available in both offline and online

versions, that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify

server installations, troubleshoot problems, and perform repair validation.
The Insight Diagnostics Offline Edition performs various in-depth system and component testing while the

OS is not running. To run this utility, boot the server using Intelligent Provisioning.
The Insight Diagnostics Online Edition is a web-based application that captures system configuration and

other related data needed for effective server management. Available in Microsoft Windows and Linux

versions, the utility helps to ensure proper system operation.
For more information or to download the utility, see the Hewlett Packard Enterprise website

http://www.hpe.com/servers/diags

).The Insight Diagnostics Online Edition is also available in the SPP.

Insight Diagnostics survey functionality

HPE Insight Diagnostics (on page

) provides survey functionality that gathers critical hardware and

software information on ProLiant servers.
This functionality supports operating systems that are supported by the server. For operating systems

supported by the server, see the Hewlett Packard Enterprise website

http://www.hpe.com/info/supportos

If a significant change occurs between data-gathering intervals, the survey function marks the previous

information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every Intelligent Provisioning-assisted HPE Insight Diagnostics

installation, or it can be installed through the SPP.

Erase Utility

CAUTION:

Perform a backup before running the Erase Utility. The utility sets the system to

its original factory state, deletes the current hardware configuration information, including array

setup and disk partitioning, and erases all connected hard drives completely. Before using this

utility, see the instructions in the

Intelligent Provisioning User Guide

.

Use the Erase Utility to erase drives and Active Health System logs, and to reset UEFI System Utilities

settings. Run the Erase Utility if you must erase the system for the following reasons:

•

You want to install a new operating system on a server with an existing operating system.

•

You encounter an error when completing the steps of a factory-installed operating system

installation.

To access the Erase Utility, click the Perform Maintenance icon from the Intelligent Provisioning home

screen, and then select

Erase

.

For more information about the Erase Utility, see the

Intelligent Provisioning User Guide

on the Hewlett

Packard Enterprise website (

http://www.hpe.com/info/intelligentprovisioning/docs

«
...
38
39
40
41
42
...
»

Содержание Apollo a6000 Chassis































































Отзывы:

Нет отзывов

Похожие инструкции для Apollo a6000 Chassis

Бренд: Hi-flying Страницы: 29

Sun Fire X2100 M2

Бренд: Sun Microsystems Страницы: 128

Бренд: NTI Страницы: 35

Бренд: LiveU Страницы: 14

Бренд: TYAN Страницы: 70

Бренд: Ekselans Страницы: 37

DOMINION KSX II

Бренд: Raritan Страницы: 362

Diplomat jr JRN-ASV

Бренд: Lucidata Страницы: 32

Бренд: Inspur Страницы: 2

Бренд: W&T Страницы: 79

Бренд: Supero Страницы: 108

Бренд: Supero Страницы: 114

Бренд: Supero Страницы: 102

Бренд: Supero Страницы: 116

2U Twin3 SuperServer 2015TA-HTRF

Бренд: Supero Страницы: 94

Бренд: Supero Страницы: 116

Бренд: Supero Страницы: 110

Бренд: Supero Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды