manualshive.com logo in svg

HP Apollo 2000 System, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP Apollo 2000 System Скачать руководство пользователя страница 125

Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.

7.

Enter the product ID and press the 

Enter

 key.

8.

To confirm exiting System Utilities, press the 

F10 

key.

The node automatically reboots.

HPE ProLiant Pre-boot Health Summary

If the node will not start up, you can use iLO to display diagnostic information on an external monitor. This
feature is supported on node s that support external video and have a UID button or an SUV connector. When
power is available to the node but the node is not powered on, iLO runs on auxiliary power and can take
control of the node video adapter to display the HPE ProLiant Pre-boot Health Summary.

For additional information, see the following documents:

•

iLO 4 User Guide

 — See the 

Hewlett Packard Enterprise website

.

• ProLiant Gen9 Troubleshooting Guide, Volume I: Troubleshooting — See 

Troubleshooting resources

.

Insight Diagnostics

The Insight Diagnostics is a proactive node management tool, available in both offline and online versions.
The tool provides diagnostics and troubleshooting capabilities to assist IT administrators who verify node
installations, troubleshoot problems, and perform repair validation.

The Insight Diagnostics Offline Edition performs various in-depth system and component testing while the OS
is not running. To run this utility, boot the node using Intelligent Provisioning.

The Insight Diagnostics Online Edition is a web-based application that captures system configuration and
other related data needed for effective node management. Available in Microsoft Windows and Linux
versions, the utility helps to ensure proper system operation.

For more information or to download the utility, see the 

Hewlett Packard Enterprise website

. The Insight

Diagnostics Online Edition is also available in the SPP.

Insight Diagnostics survey functionality

Insight Diagnostics

 provides survey functionality that gathers critical hardware and software information on

ProLiant node s.

This functionality supports operating systems that the node supports. For operating systems supported by the
node , see the 

Hewlett Packard Enterprise website

.

If a significant change occurs between data-gathering intervals, the survey function marks the previous
information and overwrites the survey data files to reflect the latest changes.

Survey functionality is installed with every Intelligent Provisioning-assisted Insight Diagnostics installation, or it
can be installed through the SPP.

Active Health System

The Active Health System monitors and records changes in the server hardware and system configuration.

The Active Health System provides:

• Continuous health monitoring of over 1600 system parameters
• Logging of all configuration changes
• Consolidated health and service alerts with precise time stamps
• Agentless monitoring that does not affect application performance

HPE ProLiant Pre-boot Health Summary

125

Содержание Apollo 2000 System



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды