HP AdvanceStack 208, Руководство по установке оборудования

Страница: 100 / 112

C-8
File Transfers
Transferring Switch Configurations
Fi
le Tran
sf
ers
Transferring Switch Configurations
You can use the following commands to transfer switch configurations
between the switch and a PC or Unix workstation.
Using Get and Put To Transfer a Configuration Between the
Switch and a Networked PC or Unix Workstation
To use Get or Put, you need the following:
■
The IP or IPX address of the remote PC or Unix workstation that is acting
as a TFTP server
■
The name assigned to the configuration file you will use on the remote PC
or Unix workstation
N o t e
The Get operation overwrites the switch’s current configuration with the
newly retrieved configuration. The switch then automatically reboots itself.
Command Function
Get Download a switch configuration file from a networked PC or Unix workstation
using TFTP.
Put* Upload a switch configuration to a file in a networked PC or Unix workstation
using TFTP.
ZGet Uses a Zmodem-compatible terminal emulation program to download a switch
configuration file from a PC or Unix workstation connected to the switch’s
console port (either directly or via a modem).
ZPut* Uses a Zmodem-compatible terminal emulation program to upload a switch
configuration to a file in a PC or Unix workstation connected to the switch’s
console port (either directly or via a modem).
*Can also be used to send the output of certain commands to a file on another device.
c_ymfile.fm5 Page 8 Friday, February 21, 1997 11:06 AM