8
NOTE:
The cabling rack position varies by switch model. Route the cable as required. For
how to fasten the power cord connected to a vertically-installed power supply,
see
Figure 5
Fastening the power cord connected to a vertically-installed power supply
3.
Plug the other end of the power cord into an AC power receptacle of the power
source, and turn on the connected circuit breaker.
4.
Verify that the input status LED is ON. It indicates that the power cord is correctly
connected. If the input status LED is OFF, troubleshoot the installation process until
the input status LED is ON.
Removing a power supply
illustrates the flow for removing a power supply. Strictly follow the sequence to
avoid possible dangers.
