HP A8002A, Руководство по установке

Страница: 27 / 32

6 Regulatory compliance and
safety
Laser device
All HP systems equipped with a laser device comply with safety standards, including International
Electrotechnical Commission (IEC) 825. With speci fi c regard to the laser, the equipment complies with
laser product performance standards set by government agencies as a Class 1 laser product. The
product does not emit hazardous light.
Laser safety warning
WARNING!
To reduce the risk of exposure to hazardous radiation:
• Do not try to open the laser device enclosure. There are no user-serviceable components inside.
• Do not operate controls, make adjustments, or perform procedures to the laser device other than
those speci fi ed herein.
• Allow only HP-authorized service technicians to repair the laser device.
Certi fi cation and classi fi cation information
This product contains a laser internal to the fi ber optic (FO) transceiver for connection to the Fibre
Channel communications port.
In the USA, the FO transceiver is certi
fi ed as a Class 1 laser product conforming to the requirements
contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. A
label on the plastic FO transceiver housing indicates the certi fi cation.
Outside the USA, the FO transceiver is certi fi ed as a Class 1 laser product conforming to the requirements
contained in IEC 825-1:1993 and EN 60825-1:1994, including Amendment 11:1996 and Amendment
2:2001.
Laser product label
The optional label in Figure 4 or equivalent may be located on the surface of the HP-supplied laser device.
Figure 4 Class 1 laser product label
This optional label indicates that the product is classi fi ed as a CLASS 1 LASER PRODUCT. This label may
appear on the laser device installed in your product.
A8002A PCI-e single-port 4Gb FC adapter and A8003A PCI-e dual-port 4Gb FC adapter for Linux and
Windows systems installation guide
27