EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at
EL-MF877-01
Tool Description
Tool Size (if
applicable)
Screw driver
2#
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Unscrew the Power Cable Holder 1.
2. Unscrew all screws 2, and then remove the mounting angle 3.
3. Remove the part 4, and then remove top cover 5.
4. Remove all of the inner cables.
5. Remove plastic panel 6 from the chassis.
6. Unscrew all screws of fan 7 on base 12, and then remove fan 7 from base 12.
7. Unscrew all screws of part 8 on base 12, and then remove part 8 from base 12.
8. Unscrew all screws of Part 9 on base 12, and then remove Part 9 from base 12.
9. Unscrew all screws on PCB 10, and then remove PCB 10.
10. Unscrew all screws of Part 11 on base 12, and then remove Part 11 from base 12.
11. Remove all of the labels from the chassis.
12. Remove the part 10-2 from cover 10-1.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Figure 1 Unscrew the Power Cable Holder 1 and screw 2
Figure 2 Remove Part 4 and Cover 5
