HP A1210n - Pavilion - 512 MB RAM, Руководство по началу работы

Страница: 45 / 120

Configuring Speaker and Sound Options
39
Disabling digital audio output with Sound Effect Manager
(optional)
To disable digital audio output:
1 Open the Sound Effect Manager: Click Start , Control Panel , Sounds,
Speech, and Audio Devices , and then Sound Effect Manager .
2 Click Audio Wizard . A window opens displaying the connector panel on the
front of the PC.
3 Click the Digital Audio button. Select Digital output off (you can also
select Digital-in to Digital-out pass through mode ).
4 Close the window.
Configuring audio output with Realtek HD Sound
Effect Manager
Follow these steps after you have installed and connected your speakers, if your PC
model has type 6 connectors and is capable of multistreaming audio.
To configure multichannel audio output for PCs with Realtek HD Sound Effect
Manager:
1 Click Start on the taskbar.
2 Click Control Panel .
3 Click Sounds , then Speech and Audio Devices (or Sounds and Audio
Devices ).
4 Click Realtek HD Sound Effect Manager . The window opens.
5 Click a button near the top of the window to see that control screen.
The Realtek HD Sound Effect Manager control screens
• Sound Effect — selects the Environment and the Equalizer settings. You
can select an environment, such as Under Water or Auditorium . To use the
Equalizer, click the Power button in the center of the circular equalizer control to
turn it on. You can click a preset button, such as
Pop or Live , or manually
adjust the settings and then save them for easy selection later.
• Mixer — allows control over volume, playback, mute, recording, and
multistreaming audio. Click the Multi-streaming button to set up
multistreaming.
• Audio I/O — selects the number of speakers, shows the whether the plugs are
analog or digital, and selects the digital audio output and digital input device.
Only speakers being used are displayed.
• Microphone — allows fine control over the microphone/recording quality.
Includes buttons for noise suppression and acoustic echo cancellation.
NOTE: If you do not see the device for your configuration, change the speaker
selection in the Speaker Configuration window.