Chapter 2
2-17
Quick Start: Learning How to Make Measurements
Learning to Make Reflection Measurements
Step 4. Output measurement results
This step in the procedure shows you how to output the measurement results to a printer.
For in-depth information on creating a hardcopy of the measurement results, refer to the
“Printing, Plotting, and Saving Measurement Results” chapter in the User's Guide.
1. Connect a printer to the analyzer as described in
“To Configure the Analyzer with
Printers or Plotters” on page 1-12
.
2. Press
and then create a title for the
measurement, as shown in
Figure 2-11
:
• Use an optional keyboard to type the title, or
• Use the front panel knob and the softkey menu to select each letter of the title.
3. Press
when you finish creating the measurement title. The title appears on the
upper-left corner of the analyzer display.
4. Press
to set up the analyzer as the controller. If you
are using an HP-IB printer, ensure that there is not another controller on the bus. (Note
that this step is not required when using parallel or serial printers.)
5. Press
to create a black and white hardcopy.
NOTE
If you encounter a problem when printing a hardcopy, refer to
“To Configure
the Analyzer with Printers or Plotters” on page 1-12
.
Figure 2-11 Example Measurement Title
Display
MORE TITLE ERASE TITLE
DONE
Local
SYSTEM CONTROLLER
Copy
PRINT MONOCHROME
Содержание 8753ES
Страница 6: ...vi ...
Страница 8: ...viii Contents ...
Страница 9: ...1 1 1 Installing Your Analyzer ...
Страница 37: ...2 1 2 Quick Start Learning How to Make Measurements ...
