OUTPDATR
SELSEG[n]
OUTPSEGAF
OUTPSEGF
OUTPFAIP
Output trace data for range of points (see SELMINPT, SELMAXPT).
Output status of limit test for channel 1.
Output status of limit test for channel 2.
Select segment number for the OUTPSEGF and OUTPSEGM
commands to report on.
Output the segment number and its status for all active segments.
Output limit test status per segment.
Output Fail Point: this command is similar to OUTPLIMF except that
it reports the number of failures first, followed by the stimulus and
trace values for each failed point in the test (note: use command
to function properly).
2 0
Installation Note 08720-90372
