4.
Remove the battery (see
Battery on page 47
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 51
)
b.
Optical drive (see
Optical drive on page 54
)
c.
Keyboard (see
Keyboard on page 58
)
d.
Fan (see
Fan on page 63
)
e.
Heat sink (see
Heat sink on page 64
)
f.
Switch cover (see
Switch cover on page 75
)
g.
TouchPad (see
TouchPad on page 70
)
h.
Display assembly (see
Display assembly on page 79
)
i.
Top cover (see
Top cover on page 84
)
j.
Speaker assembly (see
Speaker assembly on page 87
)
k.
Modem module (see
Modem module on page 89
)
l.
System board (see
System board and system board frame on page 90
)
Remove the PC Card assembly:
1.
Turn the system board upside down, with the front toward you.
2.
Remove the two Phillips PM2.0×3.0 screws that secure the PC Card assembly to the system board.
3.
Detach the slots on the PC Card assembly from the tabs on the PC Card connector
(1)
.
96 Chapter 4 Removal and replacement procedures
Содержание 8510p - Compaq Business Notebook
