HP 8153A, Руководство по эксплуатации и программированию

Страница: 100 / 290

4
If you do not, the message MISMATCH will be shown when you try to make a
recall.
Y ou edit the channel using the Modify keys . The channel that will be set by the
data is the displayed value .
Example The character eld shows the message RECALL '54 3 ! A .
Y ou press 4
Exec
5 .
If there is an HP 81554SM in channel A, channel A will be
congured according to the data in location 3.
STORE
The store function stores the instrument conguration in memory . When you
select the store function, the left side character eld shows the message STORE .
There are three parameters for this function. The module type for which the
last save to this location was made , the channel for which the information is to
be saved, and the location where the data is to be saved.
Press 4 Edit 5 to look at or edit the parameters . All of the parameters are displayed
at the same time in the right side character eld. Y ou can select between the
location and the channel using 4 ( 5 and 4 ) 5 . Y ou cannot edit the module type .
While you are editing parameters , the mode-indicator shows MENU SYS EDIT.
Figure 4-2. Editing a P arameter in System Mode
Press 4
EXEC
5 to make a store with the selected parameters .
4-4 Local Control - System Mode
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com