HP 656395-006 Скачать руководство пользователя страница 77

Страница: 77 / 88

Component identification 77

Item Description

Status

Off = Normal (System is in standby)

Power On/Standby

button and system
power LED

Solid Green = System is powered on.

Flashing Green = System is waiting to power on; Power On/Standby button is
pressed.

Solid Amber = System is in standby; Power On/Standby button service is

initialized.
Off and the Health Status LED bar is off = The system has no power.

Off and the Health Status LED bar is flashing green = The Power On/Standby

button service is being initialized.

UID LED

Solid Blue = Identified
Flashing Blue = Active remote management

Off = No active remote management

FlexibleLOM LED

Green = Network linked
Flashing Green = Network activity

Off = No link or activity

Hot-plug drive LED definitions

Item LED

Status

Definition

Locate

Solid blue

The drive is being identified by a host application.

Flashing blue

The drive carrier firmware is being updated or requires an update.

Activity ring

Rotating green

Drive activity

Off

No drive activity

Do not remove

Solid white

Do not remove the drive. Removing the drive causes one or more of

the logical drives to fail.

Off

Removing the drive does not cause a logical drive to fail.

Drive status

Solid green

The drive is a member of one or more logical drives.

Flashing green

The drive is rebuilding or performing a RAID migration, strip size

migration, capacity expansion, or logical drive extension, or is
erasing.

Flashing

amber/green

The drive is a member of one or more logical drives and predicts

the drive will fail.

Flashing amber The drive is not configured and predicts the drive will fail.

Solid amber

The drive has failed.

Off

The drive is not configured by a RAID controller.

Содержание 656395-006

























































































Результаты поиска

Содержание 656395-006

Отзывы:

Похожие инструкции для 656395-006

Бренды по названию

Популярные бренды

HP 656395-006, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание 656395-006

Отзывы:

Похожие инструкции для 656395-006

Бренды по названию

Популярные бренды