Removal and replacement procedures 53
CAUTION:
To prevent possible server blade overheating, always populate each processor
socket with a processor socket cover and a heatsink blank or a processor and a heatsink.
IMPORTANT:
Processor socket 1 must always be populated. If processor socket 1 is empty, the
server blade does not power up.
Depending on the memory configuration and processor model, the memory speed may run at 1866MHz,
1600MHz, 1333MHz, or 1066MHz. For more information, see the Memory Population Table or the Online
Memory Configuration Tool on the HP website (
http://www.hp.com/go/ddr3memory-configurator
).
To remove the component:
1.
Update the system ROM.
Locate and download the latest ROM version from the HP website (
http://www.hp.com/support
).
Follow the instructions on the website to update the system ROM.
2.
Power down the server blade (on page
23
).
3.
Remove the server blade (on page
24
).
4.
Remove the access panel ("
Access panel
" on page
25
).
5.
Remove the heatsink ("
Heatsink
" on page
50
).
6.
Open each of the processor locking levers in the order indicated, and then open the processor retaining
bracket.
Содержание 656395-006
Страница 12: ...Customer self repair 12 ...
Страница 13: ...Customer self repair 13 ...
Страница 14: ...Customer self repair 14 ...
Страница 21: ...Illustrated parts catalog 21 ...
