468
Step Command
Remarks
10.
Enter interface view.
interface
interface-type
interface-number
N/A
11.
Enable the OSPFv3 process
on the interface.
ospfv3
process-id
area
area-id
[
instance
instance-id
]
By default, OSPFv3 is disabled on
an interface.
Configuring IPv6 IS-IS between an MCE and a PE
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create an IS-IS process for an
IPv6 VPN instance and enter
IS-IS view.
isis
[
process-id
]
vpn-instance
vpn-instance-name
N/A
3.
Configure a network entity
title.
network-entity
net
By default, no NET is configured.
4.
Enable IPv6 for the IS-IS
process.
ipv6 enable
By default, IPv6 is disabled.
5.
(Optional.) Redistribute VPN
routes.
ipv6 import-route
protocol
[
process-id
] [
allow-ibgp
] [
cost
cost
| [
level-1
|
level-1-2
|
level-2
] |
route-policy
route-policy-name
|
tag
tag
] *
By default, IPv6 IS-IS does not
redistribute routes from any other
routing protocol.
If you do not specify the route level
in the command, the command
redistributes routes to the level-2
routing table.
6.
(Optional.) Configure filtering
of advertised routes.
ipv6 filter-policy
{
acl6-number
|
prefix-list
prefix-list-name
|
route-policy
route-policy-name
}
export
[
protocol
[
process-id
]
]
By default, IPv6 IS-IS does not filter
advertised routes.
7.
Return to system view.
quit
N/A
8.
Enter interface view.
interface
interface-type
interface-number
N/A
9.
Enable the IPv6 IS-IS process
on the interface.
isis ipv6 enable
[
process-id
]
By default, IPv6 IS-IS is disabled on
an interface.
Configuring EBGP between an MCE and a PE
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp
as-number
N/A
3.
Enter BGP-VPN instance view.
ip vpn-instance
vpn-instance-name
N/A
4.
Configure the PE as an EBGP
peer.
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
as-number
as-number
By default, no BGP peer is
configured.
5.
Enter BGP-VPN IPv6 unicast
address family view.
address-family ipv6
[
unicast
]
N/A
