54
NOTE:
The IP address of the access device specified here must be the same as the source IP address of the RADIUS
packets sent from the switch, which is the IP address of the outbound interface by default, or otherwise the
IP address specified with the
nas-ip
or
radius nas-ip
command on the switch.
Figure 14
Adding the switch to IMC as an access device
2.
Add a user for device management:
a.
Click the
User
tab, and select
Device Management User
from the navigation tree.
b.
Click
Add
.
c.
Configure the following parameters:
Enter
hello@bbb
as the username and set the password.
Select
SSH
as the service type.
Set the EXEC privilege level to 3. This value identifies the privilege level of the SSH user after
login and defaults to 0.
Specify the IP address range of the hosts to be managed as 10.1.1.0 through 10.1.1.255.
d.
Click
OK
.
