HP 5363B Скачать руководство пользователя страница 6

Страница: 6 / 157

M o d e l 53638

Safety Con s i d e ra tio n s

WARNING

IF THIS INSTRUMENT IS TO B E ENERGIZED VIA AN AUTOTRANS

FORMER  ( FOR  VOLTAGE  REDUCTION)  MAKE  SUR E   THE  COM
MON TERMINAL  IS  CONNECTED TO THE  EARTHED  POLE OF THE
POWER  SOURCE.

WARNING

BEFORE SWITCHING ON THE INSTRUMENT, THE PROTECTIVE

EARTH TERMINALS OF THE INSTRUMENT MUST BE CONNECTED

TO THE PROTECTIVE CONDUCTOR OF THE ( MAINS) POWER

CORD. THE MAINS PLUG SHALL ONLY BE INSERTED IN A SOCKET
OUTLET PROVIDED WITH A PROTECTED EARTH CONTACT. THE

PROTECTIVE ACTION MUST NOT BE N EGATED BY THE USE OF AN
EXTENSION CORD ( POWER CABLE) WITHOUT A PROTECTIVE
CONDUCTOR (GROUNDING).

WARNING

THE  SERVICE  INFORMATION  FOUND  IN THIS MANUAL  IS  OFTEN
USED  WITH  POWER  SUPPLIED  AND  PROTECTIVE  COVERS  RE
MOVED FROM THE  INSTRUMENT.  ENERGY  AVAILABLE AT  MANY

POINTS MAY, IF CONTACTED, RESULT IN PERSON INJURY.

CAUTION

BEFORE SWITCHING ON THIS INSTRUMENT:

1. MAKE SURE THE INSTRUMENT IS SET TO THE VOLTAGE OF

THE POWER SOURCE.

2. ENSURE THAT ALL D EVICES CONNECTED TO THIS INSTRU

MENT ARE CONNECTED TO THE PROTECTIVE (EARTH)

GROUND.

ENSURE THAT THE LINE POWER (MAINS) PLUG IS CON

NECTED TO A THREE-CONDUCTOR LINE POWER OUTLET
THAT HAS A PROTECTIVE (EARTH) GROUND. (GROUNDING

ONE CONDUCTOR OF A TWO-CONDUCTOR OUTLET IS NOT

SUFFICIENT.)

MAKE SURE THAT ONLY FUSES WITH THE R EQU I R ED RATED

CURRENT AND OF THE SPECIFIED TYPE (NORMAL BLOW,
TIM E DELAY, ETC.) ARE USED FOR REPLACEMENT. THE USE

OF R EPAI R ED FUSES AND THE SHORT-CIRCUITING OF FUSE
HOLDERS MUST BE AVOIDED.

AVOID STATIC DISCHARGE TO THE PROBE TIPS. DAMAGE

TO THE PROBES MAY R ESULT. FOLLOW CAUTIONS IN

FIGURE

1-2.

Содержание 5363B






























































































































































Результаты поиска

Содержание 5363B

Отзывы:

Бренды по названию

Популярные бренды

HP 5363B, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 5363B

Отзывы:

Бренды по названию

Популярные бренды