![background image](http://html.mh-extra.com/html/hp/4600-color-laserjet-laser-printer/4600-color-laserjet-laser-printer_technical-reference-manual_163672253.webp)
HP LaserJet 5Si
Mopier Comments
PJL commands are used to specify the destination bin and
control printer functions such as stapling and collating
multiple copies.
Specifying the
Output Bin
Documents are sent to specific output bins using the
@PJL SET OUTBIN command. The HP LaserJet 5Si
Mopier bin definitions are as follows:
Bin Description
OUTBIN Variable Name
Engine face-down bin
UPPER
High Capacity Output (HCO)
face-up bin
OPTIONALOUTBIN1
Stapling bin (in mailbox mode) OPTIONALOUTBIN7
Stapling bin (in stacker or job-
separator modes)
OPTIONALOUTBIN3
First non-stapling bin in mail-
box mode (only bin in stacker
and job-separator modes)
OPTIONALOUTBIN2
Last non-stapling bin (bottom
bin in mailbox mode)
OPTIONALOUTBIN6
Stapling Documents
To staple a document, include the following PJL command
in the PJL header at the beginning of the job (see the
example on the following page):
@PJL SET FINISH=STAPLE
To staple the output using this command, the printer
automatically determines which bin is the stapling bin,
so the output bin does not need to be specified using the
@PJL SET OUTBIN command. The printer uses the EOJ
command to determine the end of job so that the job can be
stapled correctly.
Note
Future printers may enable stapling using a different
command sequence.
Feature Support A-41
Содержание 4600 - Color LaserJet Laser Printer
