Removal and replacement procedures
Maintenance and Service Guide
4–37
Display assembly
Before removing the display assembly, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-7
).
5. Remove the following components:
a. Switch cover (see
“Switch cover” on page 4-8
)
b. Keyboard (see
“Keyboard” on page 4-9
)
c. Optical drive (see
“Optical drive” on page 4-13
)
d. Speakers (see
“Speakers” on page 4-15
)
e. Palm rest (see
“Palm rest” on page 4-16
)
f. Solid-state module (see
“Solid-state module” on page 4-20
)
g. Top cover (see
“Top cover” on page 4-22
)
Remove the display assembly:
Ä
CAUTION:
Support the display assembly when removing the following screws. Failure to support the display
assembly can result in damage to the display assembly and other computer components.
1. Remove the three Phillips PM2.5×5.0 screws
1
that secure the display assembly to the computer.
2. Lift the display assembly
2
straight up and remove it.
Description
Spare part
number
14.1-in, SVA, HD, LED display assembly (includes webcam module and cable, microphone and
cable, 2 WLAN antenna transceivers and cables, nameplate, and logo)
578180-001
