HP 432A, Руководство пользователя

Страница: 7 / 78

vi
Regulatory Information Model 432A
Certification
Hewlett-Packard Company certi fi es that this product met its published speci fi cations at the time
of shipment from the factory. Hewlett-Packard further certi fi es that its calibration measurements
are traceable to the United States National Bureau of Standards, to the extent allowed by the
Bureau's calibration facility, and to the calibration facilities of other International Standards
Organization members.
Assistance
Product maintenance agreements and other customer assistance agreements are available for
Hewlett-Packard products.
For any assistance, contact your Hewlett-Packard Sales and Service Of
fi ce. Addresses are
provided at the back of this manual.
Notice
The information contained in this document is subject to change without notice.
Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance or use of this material.
This document contains proprietary information which is protected by copyright. All rights are
reserved. No part of this document may be photocopied or reproduced without the prior written
consent of the manufacturer, Hewlett-Packard Ltd.
Restricted Rights Legend
Use, duplication, or disclosure by the government is subject to restrictions as set forth in
subdivision (b)(3)(ii) of the Rights in Technical Data and Computer Software clause at 52.227-
7013. Hewlett-Packard Company; 3000 Hanover Street; Palo Alto, California 94304.
Statement of Compliance
Electromagnetic
Compatibility (EMC)
Information
This product has been designed to meet the protection requirements of the European
Communities Electromagnetic Compatibility (EMC) directives:
EN55011:1991 (Group 1, Class A)
EN50082-1:1992
- IEC 1000-4-2 (1995) ESD
- IEC 1000-4-3 (1995) Radiated Suseptibility
- IEC 1000-4-4 (1995) EFT
In order to preserve the EMC performance of the product, any cable which becomes worn or
damaged must be replaced with the same type and speci
fi cation.
Safety Information
This instrument has been designed and tested in accordance with publication EN61010-1(1993) /
IEC 1010-1(1990) +A1(1992) +A2(1994) / CSA C22.2 No. 1010.1(1993) Safety Requirements for
Electrical Equipment for Measurement, Control and Laboratory Use, and has been supplied in a
safe condition. The instruction documentation contains information and warnings which must be
followed by the user to ensure safe operation and to maintain the instrument in a safe condition.