On the screen showing printer manufacturers and printers, select a printer driver and then click Next.
6.
On the "Name Your Printer" screen, Specify a printer name and then click Next.
7.
On the "Printer Sharing" screen, select "Do not share this printer" and then click Next.
8.
On the "Print Test Page" screen, click Next.
9.
Click Finish.
10.
For Windows NT Clients:
Note: Before you begin, make sure you have Microsoft's Service Pack 6a installed on the client(s).
Start the Add Printer Wizard (in Windows NT).
1.
Select "My Computer" and click Next.
2.
On the screen showing available ports, click on the "Add Port" button.
3.
On the "Printer Ports" screen, select "Local Port" and then click New Port.
4.
On the "Port Name" screen, enter the UNC name for the printer in the following format and click OK:
\\<print_appliance_name>\<printer_name> (where "print_appliance_name" is the name of the print
appliance and "printer_name" is the name of the printer)
5.
Click OK.
6.
On the "Printer Ports" screen click Close.
7.
On the screen showing available ports, select your newly created port and click Next.
8.
On the screen showing printer manufacturers and printers, select a printer driver and then click Next.
9.
On the screen asking for a printer name, enter your printer name and click Next.
10.
On the screen referring to printer sharing, select Not Shared and click Next.
11.
Click Finish.
12.
Configuring Printing for UNIX Clients
The following topics are discussed in the section:
configuring print queues for BSD-like systems
●
configuring print queues using SAM (HP-UX systems)
●
●
A print queue must be set up for each printer or printer personality (text, PCL, or PostScript) used.
If printing text documents from UNIX clients to an HP JetDirect print server, a special queue must be
configured on the appliance. First add the printer through the
in the web interface. On the Identify
Printer page, for connectivity select Other and then specify the remote queue name. For the remote queue name
on the target printer, TEXT must be specified (or TEXT2, TEXT3 for multi-port JetDirect print servers). This
must be done even though the target printer is an HP JetDirect device. Use the normal print queue when printing
jobs that have been formatted with a printer-specific page description language such as PDL (like PostScript) or
PCL.
Configuring Print Queues for BSD-like Systems
If the printer supports automatic language switching, the application may select the printer language via
commands embedded in the print data.
Содержание 4200 - LaserJet B/W Laser Printer
Страница 3: ...HP Print Server Appliance Documentation for Firmware Version 2 3 x 1999 2002 Hewlett Packard Company ...
Страница 7: ...are subject to HP s privacy policy which can be found at http www hp com country us eng privacy htm ...
Страница 137: ...Description The time was changed successfully on the Date Time page in the Web interface ...
