HP 39g+ Скачать руководство пользователя

Страница: 261 / 294

Reference information

R-3

Resetting the hp 39g+

If the calculator “locks up” and seems to be stuck, you
must

reset

it. This is much like resetting a PC. It cancels

certain operations, restores certain conditions, and clears
temporary memory locations. However, it does

not

clear

stored data (variables, aplet databases, programs)

unless

you use the procedure, “To erase all memory and reset
defaults”.

To reset using
the keyboard

Press and hold the

key and the third menu key

simultaneously, then release them.

If the calculator does not respond to the above key
sequence, then:

1. Turn the calculator over and locate the small hole in

the back of the calculator.

2. Insert the end of a straightened metal paper clip into

the hole as far as it will go. Hold it there for 1
second, then remove it.

3. Press

If necessary, press

and the first and

last menu keys simultaneously.

To erase all memory and reset defaults

If the calculator does not respond to the above resetting
procedures, you might need to restart it by erasing all of
memory.

You will lose everything you have stored.

All

factory-default settings are restored.

1. Press and hold the

key, the first menu key, and

the last menu key simultaneously.

2. Release all keys.

Note: To cancel this process, release only the top-row
keys, then press the third menu key.

views

The possible contexts for an aplet:
Plot, Plot Setup, Numeric, Numeric
Setup, Symbolic, Symbolic Setup,
Sketch, Note, and special views like
split screens.

Содержание 39g+







































































































































































































































































































Результаты поиска

Содержание 39g+

Отзывы:

Похожие инструкции для 39g+

Бренды по названию

Популярные бренды

HP 39g+, Руководство пользователя

Результаты поиска

Содержание 39g+

Отзывы:

Похожие инструкции для 39g+

Бренды по названию

Популярные бренды