HP 345561-001, Руководство по запуску и справочник

Страница: 75 / 160

Drives and Drive Media
Startup and Reference Guide—Part 2 5–7
Removing a Disc (Without Power)
If the notebook is turned off or if no power is available, the
release button on the optical drive will not work. To remove a disc
from an optical drive without using the release button:
1. Insert the end of a small object like a paper clip into the
release access
1
in the front bezel of the drive.
2. Press gently on the paper clip until the media tray is released,
then pull the tray outward until it is fully extended 2 .
3. Remove the disc from the tray by gently pushing down on the
spindle while pulling up on the outer edges of the disc
3
.
Handle the disc by the edges, not the flat surfaces. If the
media tray is not fully extended, tilt the disc as you remove it.
4. Close the media tray
4
.
5. Place the disc in a protective case.
Removing a disc from the optical drive when power is not available
345561-001.book Page 7 Monday, July 14, 2003 11:19 AM