10.
Insert a new memory module:
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module, and do not bend the memory module.
a.
Align the notched edge
(1)
of the memory module with the tab in the memory module slot.
b.
With the memory module at a 45-degree angle from the surface of the hard drive bay, press
the module
(2)
into the memory module slot until it is seated.
c.
Gently press the memory module
(3)
down, applying pressure to both the left and right edges
of the memory module, until the retention clips snap into place.
11.
Align the tabs on the hard drive cover with the notches on the computer
(1)
, and then close the
cover
(2)
.
48
Chapter 6 Memory modules
