background image

Cisco Catalyst Blade Switch 3020 for HP Getting Started Guide  [Cisco Catalyst Blade Switch 3000 Series] - Cisco Systems

Company telephone number 

 

Product model number 

 

Product serial number 

 

Maintenance contract number 

 

HP Hardware Warranty Terms 

This section provides the limited warranty and material limitations for the HP ProLiant and X86 Servers and Options. 

Limited Warranty and Material Limitations 

Each product is sold subject to the express limited warranty statement relating to that product. THE GLOBAL LIMITED WARRANTY AND TECHNICAL SUPPORT STATEMENT PROVIDES IMPORTANT INFORMATION ABOUT THE NATURE AND SCOPE OF THE EXPRESS LIMITED WARRANTY 
PROVIDED FOR THE HP PRODUCT, AND ALSO CONTAINS CERTAIN DISCLAIMERS AND LIMITATIONS OF LIABILITY BY HP, WHICH MATERIALLY IMPACT YOUR RIGHTS. ACCORDINGLY, YOU ARE STRONGLY ADVISED TO CAREFULLY READ THE GLOBAL LIMITED WARRANTY AND 
TECHNICAL SUPPORT STATEMENT BEFORE USING YOUR HP PRODUCT. YOUR USE OF THE HP PRODUCT IS DEEMED TO BE ACCEPTANCE OF THE TERMS AND CONDITIONS SET FORTH IN THE GLOBAL LIMITED WARRANTY AND TECHNICAL SUPPORT STATEMENT. 

You can view, print, or download the global limited warranty and technical support statement for ProLiant and X86 servers and options at 

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

 

If you do not have access to the website, you can use this form to order a printed copy of the global limited warranty and technical support statement. 

Document:

 

 

Step 1. Enter product information (REQUIRED):

 

Global Limited Warranty and Technical Support - 
HP ProLiant and X86 Servers and Options 

 

Date of Purchase: 

Step 2. Enter delivery address:

 

Company Name: 

Name: 

Address: (No P.O. Boxes) 

City:

State/Province: 

Zip/Postal Code 

Country:

Phone Number:

Email: 

Step 3. Place your order:

 

Fax this form to 1-800-469-1690 (toll-free in U.S. and Canada Fax this form to 1-281-518-1599 (toll outside U.S. and Canada) 

Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited 
warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. 

Contacts & Feedback

 | 

Help

 | 

Site Map

 

© 1992-2007 Cisco Systems, Inc. All rights reserved.

Terms & Conditions

 | 

Privacy Statement

 | 

Cookie Policy

 | 

Trademarks of Cisco Systems, Inc.

http://www.cisco.com/en/US/products/ps6748/products_getting_started_guide09186a00806c38a8.html (11 of 11)4/19/2007 10:27:48 AM

Содержание 3020 - Cisco Catalyst Blade Switch












Отзывы: