HP3000
Bus ness
Servers
• Verifying that all of the necessary software
modules have been successfully installed by
AUTOINST and are at the
NMMAINT.PUB.SYS utility.
• Performing full system backups as neces-
sary and ensuring that the HP 3000 system
and personnel with the HP 3000 system
management knowledge are available when
HP is onsite to complete the minimum con-
figuration of SNA IMF/iX.
The customer is also responsible for
completing the configuration in order to fully
integrate SNA IMF/iX into the existing
customer network after HP has complete the
minimum configuration of SNA IMF/iX.
HP Responsibility
Following the installation of SNA IMF/iX, HP
is responsible for the following:
• Confirming that all of the necessary soft-
ware modules have been installed and are at
the correct version level.
• Configuring the SNA IMF/iX product to a
minimum configuration in order to verify
software and hardware functionality.
• Verifying the SNA IMF/iX configuration by
issuing the RUN TTSSON.PUB.SYS com-
mand with the appropriate parameters and
entering the IBMTEST command. This test
verifies the LU to SSCP session.
These steps complete HP’s portion of the
installation and minimum configuration of
SNA IMF/iX.
Additional Implementation
Assistance
For implementation needs that go beyond
installation, the customer can either provide
self-support or can purchase additional
services from HP. These services included
Network Startup and HP ConsultLine. In
addition, the customer can also purchase
service from HP on a time-and-materials basis.
Network Startup includes implementation
scheduling and coordination assistance,
network configuration and verification testing,
and network documentation.
System Environment
SNA IMF/iX is available on all HP 3000 Series
900 systems with currently supported releases
of the MPE/iX operating system.
SNA IMF/iX requires installation and
operation of HP 30291B and A5563A
SNA/SDLC Link/iX, J2167B SNA/Token Ring
Link/iX, or HP 36939B SNA/X.25 Link/iX.
Support Products
HP offers a spectrum of support service
products to help plan, implement, operate,
and manage your multivendor network
throughout the network lifecycle.
For more information, contact your HP Sales
Representative, or refer to the HP data sheets
for specific support services.
Documentation
The following documentation is for SNA
IMF/iX:
• 30293-61000 SNA IMF/iX Node Manager’s
Guide
• 30293-61005 SNA IMF Programmer’s
Reference Manual
• 30293-61008 Using SNA IMF Pass Thru
• J2220-61025 HP SNA Products remote
System Configuration Guide
• 30293-60211 SNA IMF/iX: User Support
Guide (For use in Taiwan)
• 30293-60221 SNA IMF/iX: User Support
Guide (For use in Japan)
• 30293-60231 SNA IMF/iX: User Support
Guide (For use in Korea)
12
