•
Manual is converted to Network Fault Tolerance Only (NFT).
SmartSwitch is converted to Network Fault Tolerance Only with Preference Order.
•
rimaryNic attribute determines which team member
aryRanking attribute.
Scrip
nfiguration script file to duplicate
rce ProLiant BL/ML/DL server on a target server.
is
indows operating systems:
e
Configuration Utility (NCU) must be closed.
the SmartStart Scripting Toolkit (SSST)
using
ource server.
2.
3.
e script file, HP recommends that you run CQNICCMD/ P to check the syntax of the
ors and warnings. The default location of the log file is
ntax of the /P option is cqniccmd
5.
ax.
6.
he SmartStart Scripting Toolkit (SSST), refer to the documentation included
be downloaded from http://www.hp.com/servers/proliantessentials
•
For Smart Switch Teams, the existing PreferredP
should be more highly ranked than others within the PreferredPrim
All other unspecified parameters use their defaults.
ting application (CQNICCMD)
CQNICCMD is a Windows utility that processes a network adapter co
the adapter teaming configuration of a sou
Th utility is supported on the following W
•
Windows Server 2008
•
Windows Server 2008 x64 Editions
•
Windows Server 2003
•
Windows Server 2003 x64 Editions
Run the utility from the command line in a Command Prompt window, from the
Run
option on th
Windows Start menu, or from a Windows command file. To execute the CQNICCMD utility from the
command line, the HP Network
HP recommends that you use this application as part of
deployment. However, the application can be used outside of this environment. Follow these steps when
the scripting application.
1.
Configure adapter teaming on the s
Generate a script file on the source server by clicking
Save
in the HP NCU user interface or running
CQNICCMD /S<filename> in the Command Line utility.
Modify the script file as necessary.
If you modify th
modified file and check the log file for err
\cpqsystem\log\cpqteam.log on the system drive. The sy
/p<filename>
4.
Install the HP NCU on the target system.
Run the Command Line utility with the following synt
cqniccmd /c<filename>
Check the log file for errors and warnings. The default location of the log file is
\cpqsystem\log\cpqteam.log on the system drive.
For use of this utility with t
with SSST. The SSST can
(
http://www.hp.com/servers/proliantessentials
).
Comm
CMD [[F/] /C<filename>] [/D] [/L <filename>] [/P <filename>]
ilename>] [/?]
Only one of the following configuration options can be specified at a time:
and line syntax
CQNIC
[/S<f
Scripting 7
