manualshive.com logo in svg

HP 280 G3 Microtower Business, Руководство по техническому обслуживанию и ремонту, Страница: 55 / 116

Поделиться
Скачать
HP 280 G3 Microtower Business Скачать руководство пользователя страница 55

●

Hyper-Threading (enable/disable). Default is enabled.

●

NIC PXE Option ROM Download (enable/disable). Default is enabled.

Recovering the Configuration Settings

This method of recovery requires that you first perform the Save to Removable Media command with the 
Computer Setup (F10) Utility before Restore is needed. (See 

Computer Setup—File on page 42

 in the 

Computer Setup—File table.)

NOTE:

It is recommended that you save any modified computer configuration settings to a USB flash media 

device and save the device for possible future use.

To restore the configuration, insert the USB flash media device with the saved configuration and perform the 
Restore from Removable Media command with the Computer Setup (F10) Utility. (See 

Computer Setup—File 

on page 42

 in the Computer Setup—File table.)

Recovering the Configuration Settings

47

Содержание 280 G3 Microtower Business





















































































































Отзывы:

Нет отзывов