manualshive.com logo in svg

HP 205 G1, Руководство по обслуживанию и ремонту

Поделиться
Скачать
HP 205 G1 Скачать руководство пользователя страница 115

Table 10-1

  Numeric Codes and Text Messages (continued)

Control panel message

Description

Recommended action

3.

If the error still persists, replace the 
system board.

2205-Interface error during MEBx execution

MEBx operation experienced a hardware error 
during communication with ME.

1.

Reboot the computer.

2.

If the error persists, update to the latest 
BIOS version.

3.

If the error still persists, replace the 
system board.

2211-Memory not configured correctly for 
proper MEBx execution.

SODIMM1 or XMM1 is not installed.

Make sure there is a memory module in the 
black SODIMM1 socket and that it is properly 
seated.

2212-USB Key Provisioning failure writing to 
device

USB device used for USB key provisioning will 
not allow BIOS to update provision file properly.

1.

Try a different USB key device for 
provisioning.

2.

If the error persists, update to the latest 
BIOS version and ME firmware version.

3.

If the error still persists, replace the 
system board.

2217-ME Firmware Version request failure

ME firmware is not properly responding to BIOS 
query for version information.

1.

Reboot the computer.

2.

If the error persists, update to the latest 
BIOS version and ME firmware version.

3.

If the error still persists, replace the 
system board.

2218-ME Firmware Version should be updated

ME firmware must be updated to match current 
functionality contained in the system BIOS.

1.

Update to the latest ME firmware version.

2.

If the error persists and system BIOS has 
been recently updated, restore previous 
system BIOS version.

3.

If the error still persists, replace the 
system board.

2219-USB Key Provisioning file has invalid 
header identifier

Provisioning file contained on the USB key has 
been corrupted or is not a valid version for the 
current ME firmware.

1.

Recreate the provisioning file using third 
party management console software.

2.

If the error persists and system BIOS has 
been recently updated, restore previous 
system BIOS version. Otherwise, update 
the ME firmware version.

3.

If the error still persists, replace the 
system board.

2220-USB Key Provisioning file has mismatch 
version

Provisioning file contained on the USB key is not 
a valid version for the current ME firmware.

1.

Reboot the computer.

2.

If the error persists and system BIOS has 
been recently updated, restore previous 
system BIOS version. Otherwise, update 
the ME firmware version.

3.

If the error still persists, replace the 
system board.

2230-General error during MEBx execution

Error occurred during MEBx execution which 
fails into the “General” grouping. Status 
information displayed along with the error 
provides further clarity into the failure. MEBx 

1.

Reboot the computer.

2.

If the error persists, update to the latest 
BIOS version and ME firmware version.

POST Numeric Codes and Text Messages 107

Содержание 205 G1

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды